烧录镜像第一次启动，串口连接进不去系统

Duo
1

:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
E:Boot failed (8).
E:ra=0x440a264
E:RESET:panic:-1
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000.SNF.USBI.BS/EMMC.PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
E:Boot failed (8).
E:ra=0x440a264
E:RESET:panic:-1
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000.SNF.USBI.BS/EMMC.PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
E:Boot failed (8).
E:ra=0x440a264
E:RESET:panic:-1
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000.SNF.USBI.BS/EMMC.PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
E:Boot failed (8).
E:ra=0x440a264
E:RESET:panic:-1
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000.SNF.USBI.BS/EMMC.PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)
PS. E:load param1 (-78)

2

这问题我也遇到，测试过程发现：如果不安装TF卡连接串口调试工具，就会出现同样的的信息
问题可能性：
1、TF卡有问题
2、img文件有问题
3、可能供电不足导致，这是我遇到的，milk-V供电是通过USB-TTL板供的，换成TYPE-C供电就没这问题。

3

之前测试过哪怕sd卡上什么内容都没有，也会出现上面的情况

4

我成功解决了，把SD卡结合烧录器插电脑格式化为NTFS,设置一个分区，感觉是烧录工具的问题，后面用win32diskmanger成功烧录进去了，用串口交互可以进系统。