Duo Module 01 DSI-Display 8HD Not Work How To Resolve?

Duo
, , ,
1

Hello,
I am using a board based on the Duo Module 01, and I am facing two issues:

  1. When I connect the GC2083 camera to the board and run the camera_test.sh script, the board crashes, the system freezes, and Linux stops responding. However, the same camera works perfectly when tested with the DUO S board. Could this be a hardware issue with the Duo Module 01?
  2. The second issue is with a Radxa 8HD display based on MIPI DSI. When I connect it to the Duo Module 01 and run the ./sample_dsi --panel=MILKV_8HD command, only the backlight turns on, but nothing is displayed on the screen. Could this indicate a hardware problem with the Duo Module 01 I received?

Any advice or troubleshooting tips would be appreciated. Thank you!

1 Like
2

If I were you and had a multichannel signal analyzer, I would try and compare what each board does on signal lines. (And I don’t have the Module 01 board).