Milkv duos sd 1.1.1版本刷机后启动失败

rom : milkv-duos-sd-v1.1.1-2024-0528.img.zip

st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a400.
SD/0x9400/0x1000/0x1000/0.P2E.
DPS/0xa400/0x2000.
SD/0xa400/0x2000/0x2000/0.DPE.
cv181x DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc400/0x9fe00000/0x3600.
[R2TE:. 0/0x3600/0x3600/0.RSC.
1M.S2/800x8f9a60]0P/r0ex 8s0y0s0t0e0m0 0i/n0ixt1 bd0o0n0e.

RT: [1.287222]CVIRTOS Build Date:May 28 2024 (Time :21:08:16)
RT: [1.293136]Post system init done
RT: [1.296451]create cvi task
RT: [1.299268][cvi_spinlock_init] succeess
RT: [1.303171]prvCmdQuRunTask run
SD/0xfa00/0x1b000/0x1b000/0.ME.
L2/0x2aa00.
SD/0x2aa00/0x200/0x200/0.L2/0x414d3342/0xcafedefd/0x80200000/0x40000/0x40000
COMP/1.
SD/0x2aa00/0x40000/0x40000/0.DCP/0x80200020/0x1000000/0x81900020/0x40000/1.
DCP/0x865d8/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9

/ __ \ / | _ _ |
| | | | __ ___ _ __ | ( | |) || |
| | | | '_ \ / _ \ '_ \ ___ | _ < | |
| || | |) | __/ | | |) | |) || |
_/| ./ _|| ||/|____/|
| |
|_|

Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3

Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes

Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109

U-Boot 2021.10 (May 28 2024 - 21:08:09 +0800) cvitek_cv181x

DRAM: 510 MiB
gd->relocaddr=0x94f4c000. offset=0x14d4c000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - b2:4e:cc:70:bf:63
eth0: ethernet@4070000
Hit any key to stop autoboot: 0
Boot from SD ...
switch to partitions #0, OK
mmc0 is current device
3083696 bytes read in 138 ms (21.3 MiB/s)

Loading kernel from FIT Image at 81800000 ...
Using 'config-cv1813h_milkv_duos_sd' configuration
Trying 'kernel-1' kernel subimage
Description: cvitek kernel
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x818000d8
Data Size: 3061165 Bytes = 2.9 MiB
Architecture: RISC-V
OS: Linux
Load Address: 0x80200000
Entry Point: 0x80200000
Hash algo: crc32
Hash value: 570b1819
Verifying Hash Integrity ... crc32+ OK

Loading fdt from FIT Image at 81800000 ...
Using 'config-cv1813h_milkv_duos_sd' configuration
Trying 'fdt-cv1813h_milkv_duos_sd' fdt subimage
Description: cvitek device tree - cv1813h_milkv_duos_sd
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x81aeb79c
Data Size: 20656 Bytes = 20.2 KiB
Architecture: RISC-V
Hash algo: sha256
Hash value: d9e69af25374e8182d071d730fc26e0ed544083934101538bd491ec6be3caccb
Verifying Hash Integrity ... sha256+ OK
Booting using the fdt blob at 0x81aeb79c
Uncompressing Kernel Image
Decompressing 6922240 bytes used 914ms
Loading Device Tree to 00000000945fb000, end 00000000946030af ... OK

Starting kernel ...

[ 0.000000] Linux version 5.10.4-tag- (root@06883d61fb65) (riscv64-unknown-linux-musl-gcc (Xuantie-900 linux-5.10.4 musl gcc Toolchain V2.6.1 B-20220906) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 PREEMPT Tue May 28 21:08:24 CST 2024
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Ion: Ion memory setup at 0x0000000095400000 size 170 MiB
[ 0.000000] OF: reserved mem: initialized node ion, compatible id ion-region
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080000000-0x000000009fdfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff]
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] DMA32 zone: 1785 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 130560 pages, LIFO batch:31
[ 0.000000] SBI specification v0.3 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x9
[ 0.000000] SBI v0.2 TIME extension detected
[ 0.000000] SBI v0.2 IPI extension detected
[ 0.000000] SBI v0.2 RFENCE extension detected
[ 0.000000] riscv: ISA extensions acdfimsuv
[ 0.000000] riscv: ELF capabilities acdfimv
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128775
[ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rootwait rw console=ttyS0,115200 earlycon=sbi riscv.fwsz=0x80000 loglevel=9
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 330812K/522240K available (4120K kernel code, 544K rwdata, 1883K rodata, 148K init, 206K bss, 191428K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@70000000: mapped 101 interrupts with 1 handlers for 2 contexts.
[ 0.000000] random: get_random_bytes called from start_kernel+0x2dc/0x418 with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000007] sched_clock: 64 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008404] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.019125] pid_max: default: 4096 minimum: 301
[ 0.023999] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.031504] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.040976] ASID allocator initialised with 65536 entries
[ 0.046660] rcu: Hierarchical SRCU implementation.
[ 0.052053] EFI services will not be available.
[ 0.057120] devtmpfs: initialized
[ 0.065201] early_time_log: do_initcalls: 4624819us
[ 0.070752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.080796] futex hash table entries: 16 (order: -4, 384 bytes, linear)
[ 0.087749] pinctrl core: initialized pinctrl subsystem
[ 0.093561] NET: Registered protocol family 16
[ 0.098504] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.105805] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.114514] thermal_sys: Registered thermal governor 'step_wise'
[ 0.128115] OF: /gpio@03020000/gpio-controller@0: could not find phandle
[ 0.141317] OF: /gpio@03021000/gpio-controller@1: could not find phandle
[ 0.148308] OF: /gpio@03022000/gpio-controller@2: could not find phandle
[ 0.155295] OF: /gpio@03023000/gpio-controller@3: could not find phandle
[ 0.162285] OF: /gpio@05021000/gpio-controller@4: could not find phandle
[ 0.170971] clk reset: nr_reset=64 resource_size=8
[ 0.176490] get audio clk=24576000
[ 0.180020] cvitek-i2s-subsys 4108000.i2s_subsys: Set clk_sdma_aud0~3 to 24576000
[ 0.200940] dw_dmac 4330000.dma: CVITEK DMA Controller, 8 channels, probe done!
[ 0.209169] SCSI subsystem initialized
[ 0.213578] usbcore: registered new interface driver usbfs
[ 0.219330] usbcore: registered new interface driver hub
[ 0.224917] usbcore: registered new device driver usb
[ 0.232945] Ion: ion_parse_dt_heap_common: id 0 type 2 name carveout align 1000
[ 0.240915] Ion: rmem_ion_device_init: heap carveout base 0x0000000095400000 size 0x000000000aa00000 dev (ptrval)
[ 0.252188] ion_carveout_heap_create, size=0xaa00000
[ 0.257489] cvi_get_rtos_ion_size, rtos ion_size get:0x1600000
[ 0.263467] ion_carveout_heap_create, size(exclusion of rtos_ion_size)=0x9400000
[ 0.856225] platform carveout: [ion] add heap id 0, type 2, base 0x95400000, size 0xaa00000
[ 0.865158] Advanced Linux Sound Architecture Driver Initialized.
[ 0.871979] Bluetooth: Core ver 2.22
[ 0.875698] NET: Registered protocol family 31
[ 0.880285] Bluetooth: HCI device and connection manager initialized
[ 0.886917] Bluetooth: HCI socket layer initialized
[ 0.892025] Bluetooth: L2CAP socket layer initialized
[ 0.897333] Bluetooth: SCO socket layer initialized
[ 0.902964] clocksource: Switched to clocksource riscv_clocksource
[ 0.911122] NET: Registered protocol family 2
[ 0.916495] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.925184] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.933197] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.940640] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.947358] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.954127] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.961543] NET: Registered protocol family 1
[ 0.966575] RPC: Registered named UNIX socket transport module.
[ 0.972702] RPC: Registered udp transport module.
[ 0.977572] RPC: Registered tcp transport module.
[ 0.982495] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.991379] Initialise system trusted keyrings
[ 0.996191] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[ 1.008396] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.069849] Key type asymmetric registered
[ 1.074105] Asymmetric key parser 'x509' registered
[ 1.084373] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 1.092612] printk: console [ttyS0] disabled
[ 1.097113] 4140000.serial: ttyS0 at MMIO 0x4140000 (irq = 14, base_baud = 1562500) is a 16550A
[ 1.106230] printk: console [ttyS0] enabled
[ 1.106230] printk: console [ttyS0] enabled
[ 1.114823] printk: bootconsole [sbi0] disabled
[ 1.114823] printk: bootconsole [sbi0] disabled
[ 1.124926] 4150000.serial: ttyS1 at MMIO 0x4150000 (irq = 15, base_baud = 1562500) is a 16550A
[ 1.134665] 4160000.serial: ttyS2 at MMIO 0x4160000 (irq = 16, base_baud = 1562500) is a 16550A
[ 1.144442] 4170000.serial: ttyS3 at MMIO 0x4170000 (irq = 17, base_baud = 1562500) is a 16550A
[ 1.154205] 41c0000.serial: ttyS4 at MMIO 0x41c0000 (irq = 18, base_baud = 1562500) is a 16550A
[ 1.166431] libphy: Fixed MDIO Bus: probed
[ 1.171502] bm-dwmac 4070000.ethernet: IRQ eth_wake_irq not found
[ 1.177856] bm-dwmac 4070000.ethernet: IRQ eth_lpi not found
[ 1.183848] bm-dwmac 4070000.ethernet: Hash table entries set to unexpected value 0
[ 1.191908] bm-dwmac 4070000.ethernet: no reset control found
[ 1.198091] bm-dwmac 4070000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 1.205001] bm-dwmac 4070000.ethernet: DWMAC1000
[ 1.209902] bm-dwmac 4070000.ethernet: DMA HW capability register supported
[ 1.217126] bm-dwmac 4070000.ethernet: RX Checksum Offload Engine supported
[ 1.224350] bm-dwmac 4070000.ethernet: COE Type 2
[ 1.229240] bm-dwmac 4070000.ethernet: TX Checksum insertion supported
[ 1.236014] bm-dwmac 4070000.ethernet: Normal descriptors
[ 1.241621] bm-dwmac 4070000.ethernet: Ring mode enabled
[ 1.247140] bm-dwmac 4070000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.254902] bm-dwmac 4070000.ethernet: device MAC address b2:4e:cc:70:bf:63
[ 1.286124] libphy: stmmac: probed
[ 1.289890] CVITEK CV182XA stmmac-0:00: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.301019] CVITEK CV182XA stmmac-0:01: attached PHY driver [CVITEK CV182XA] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 1.313088] bm-dwmac 4070000.ethernet: Cannot get clk_500m_eth!
[ 1.319348] bm-dwmac 4070000.ethernet: Cannot get gate_clk_axi4!
[ 1.325881] usbcore: registered new interface driver asix
[ 1.331570] usbcore: registered new interface driver ax88179_178a
[ 1.337956] usbcore: registered new interface driver cdc_ether
[ 1.344090] usbcore: registered new interface driver smsc95xx
[ 1.350126] usbcore: registered new interface driver net1080
[ 1.356067] usbcore: registered new interface driver cdc_subset
[ 1.362272] usbcore: registered new interface driver zaurus
[ 1.368145] usbcore: registered new interface driver cdc_ncm
[ 1.374801] dwc2 4340000.usb: axi clk installed
[ 1.379542] dwc2 4340000.usb: apb clk installed
[ 1.384259] dwc2 4340000.usb: 125m clk installed
[ 1.389064] dwc2 4340000.usb: 33k clk installed
[ 1.393779] dwc2 4340000.usb: 12m clk installed
[ 1.398574] dwc2 4340000.usb: EPs: 8, dedicated fifos, 3072 entries in SPRAM
[ 1.406328] dwc2 4340000.usb: DWC OTG Controller
[ 1.411185] dwc2 4340000.usb: new USB bus registered, assigned bus number 1
[ 1.418446] dwc2 4340000.usb: irq 39, io mem 0x04340000
[ 1.424674] hub 1-0:1.0: USB hub found
[ 1.428682] hub 1-0:1.0: 1 port detected
[ 1.434116] usbcore: registered new interface driver usb-storage
[ 1.440719] i2c /dev entries driver
[ 1.446035] Bluetooth: HCI UART driver ver 2.3
[ 1.450687] Bluetooth: HCI UART protocol H4 registered
[ 1.456494] sdhci: Secure Digital Host Controller Interface driver
[ 1.462924] sdhci: Copyright(c) Pierre Ossman
[ 1.467453] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.473561] cvi:sdhci_cvi_probe
[ 1.522983] mmc0: SDHCI controller on 4310000.cv-sd [4310000.cv-sd] using ADMA 64-bit
[ 1.531146] cvi_proc_init cvi_host 0x(ptrval)
[ 1.536755] cvi:sdhci_cvi_probe
[ 1.579542] mmc1: SDHCI controller on 4320000.wifi-sd [4320000.wifi-sd] using ADMA 64-bit
[ 1.588680] usbcore: registered new interface driver usbhid
[ 1.594614] usbhid: USB HID core driver
[ 1.599507] usbcore: registered new interface driver snd-usb-audio
[ 1.606877] cvitek-i2s 4100000.i2s: cvi_i2s_probe
[ 1.612470] cvitek-i2s 4130000.i2s: cvi_i2s_probe
[ 1.618370] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
[ 1.631013] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
[ 1.640570] cvitekaadc 300a100.adc: cvitekaadc_probe
[ 1.646355] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
[ 1.658688] cvitekadac 300a000.dac: cvitekadac_probe
[ 1.664242] cvitekadac_probe gpio_is_valid mute_pin_l
[ 1.669659] cvitekadac_probe gpio_is_valid mute_pin_r
[ 1.679458] NET: Registered protocol family 17
[ 1.684349] Bluetooth: RFCOMM TTY layer initialized
[ 1.689604] Bluetooth: RFCOMM socket layer initialized
[ 1.699031] Bluetooth: RFCOMM ver 1.11
[ 1.710894] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.716478] Bluetooth: BNEP filters: protocol multicast
[ 1.723089] Bluetooth: BNEP socket layer initialized
[ 1.729357] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.736619] Bluetooth: HIDP socket layer initialized
[ 1.746079] Loading compiled-in X.509 certificates
[ 1.787696] cviteka-adc sound_adc: cviteka_adc_probe, dev name=sound_adc
[ 1.795820] cviteka-adc sound_adc: cviteka_adc_probe start devm_snd_soc_register_card
[ 1.817760] cviteka-dac sound_dac: cviteka_dac_probe, dev name=sound_dac
[ 1.839651] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.862123] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.871433] cfg80211: failed to load regulatory.db
[ 1.879097] ALSA device list:
[ 1.882352] dw-apb-uart 4140000.serial: forbid DMA for kernel console
[ 1.894810] Waiting for root device /dev/mmcblk0p3...
[ 1.911801] random: fast init done
[ 2.295080] mmc0: new ultra high speed DDR50 SDHC card at address 59b4
[ 2.302638] mmcblk0: mmc0:59b4 USD 15.0 GiB
[ 2.310939] mmcblk0: p1 p2 p3
[ 2.985631] random: crng init done
[ 3.931161] sdhci_irq: host->mmc->card->type = 1
[ 3.935944] sdhci_irq: err cmd 00000000c2b7c5df
[ 3.940626] sdhci_irq: err opcode 25
[ 3.944321] sdhci_irq: err interrupt 0x00208001
[ 3.949002] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 3.955654] mmc0: sdhci: Sys addr: 0x00000001 | Version: 0x00000005
[ 3.962307] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
[ 3.968960] mmc0: sdhci: Argument: 0x00041003 | Trn mode: 0x0000002b
[ 3.975614] mmc0: sdhci: Present: 0x03f70000 | Host ctl: 0x0000001f
[ 3.982266] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 3.988920] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000407
[ 3.995573] mmc0: sdhci: Timeout: 0x00000005 | Int stat: 0x00000000
[ 4.002225] mmc0: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b
[ 4.008879] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 4.015531] mmc0: sdhci: Caps: 0x3f68c832 | Caps_1: 0x08006077
[ 4.022185] mmc0: sdhci: Cmd: 0x0000193a | Max curr: 0x00000000
[ 4.028838] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20104019
[ 4.035490] mmc0: sdhci: Resp[2]: 0x55534420 | Resp[3]: 0x00000900
[ 4.042143] mmc0: sdhci: Host ctl2: 0x0000008c
[ 4.046736] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000080f72218
[ 4.054107] mmc0: cvi: : Reg_200: 0x00000300 | Reg_240: 0x00640100
[ 4.060761] mmc0: cvi: : Reg_244: 0x00000000 | Reg_248: 0x00000000
[ 4.067413] mmc0: cvi: : Reg_24C: 0x00000000 | unplugg: 0x00000000
[ 4.074073] mmc0: cvi: : PAD_SDIO0_PWR_EN:0x00 PU:0 PD:1 DS[2:0]:010
[ 4.080637] mmc0: cvi: : PAD_SDIO0_CD:0x03 PU:1 PD:0 DS[2:0]:010
[ 4.086934] mmc0: cvi: : PAD_SDIO0_CLK:0x00 PU:0 PD:1 DS[2:0]:111
[ 4.093230] mmc0: cvi: : PAD_SDIO0_CMD:0x00 PU:1 PD:0 DS[2:0]:010
[ 4.099526] mmc0: cvi: : PAD_SDIO0_D0:0x00 PU:1 PD:0 DS[2:0]:010
[ 4.105822] mmc0: cvi: : PAD_SDIO0_D1:0x00 PU:1 PD:0 DS[2:0]:010
[ 4.112117] mmc0: cvi: : PAD_SDIO0_D2:0x00 PU:1 PD:0 DS[2:0]:010
[ 4.118413] mmc0: cvi: : PAD_SDIO0_D3:0x00 PU:1 PD:0 DS[2:0]:010
[ 4.124707] mmc0: cvi: : clk_sd0 enable[19]:0xffffe38f
[ 4.130015] mmc0: cvi: : clk_sd0 source_select:0
[ 4.134786] mmc0: cvi: : clk_sd0 REG:0x03002074 = 0x00000000
[ 4.140632] mmc0: sdhci: ============================================
[ 4.624696] blk_update_request: I/O error, dev mmcblk0, sector 266243 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 4.635971] Buffer I/O error on dev mmcblk0p3, logical block 1, lost sync page write
[ 4.644036] EXT4-fs (mmcblk0p3): I/O error while writing superblock
[ 4.650590] EXT4-fs (mmcblk0p3): mount failed
[ 4.655488] VFS: Cannot open root device "mmcblk0p3" or unknown-block(179,3): error -5
[ 4.663757] Please append a correct "root=" boot option; here are the available partitions:
[ 4.672462] b300 15711232 mmcblk0
[ 4.672471] driver: mmcblk
[ 4.679652] b301 131072 mmcblk0p1 70e879b7-01
[ 4.679659]
[ 4.686755] b302 2048 mmcblk0p2 70e879b7-02
[ 4.686761]
[ 4.693838] b303 786432 mmcblk0p3 70e879b7-03
[ 4.693844]
[ 4.700906] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3)
[ 4.709629] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) ]---

Reflash? Try another TF catd? Verify the image’s checksum?

2 Likes

Make sure the complete file was synced to the sd card.
What happened is that the kernel wasn’t able to mount the ext4 filesystem. So the flashed image is likely corrupt.

If after reflashing it still doens’t work you could also check if the checksum of the downloaded image is correct.

2 Likes

Thanks. I replaced the TF card, and after re-downloading the image, it worked fine.

1 Like